The lengthened arm of the wood grabber is a machine and equipment often used in the construction industry today. Because of its high work efficiency, it is warmly welcomed by everyone.
The lengthened arm of the wood grabber is a machine and equipment often used in the construction industry today. Because of its high work efficiency, it is warmly welcomed by everyone. The grab is the key component of the lengthened arm of the wood grabber, which determines the successful work of the lengthened arm of the wood grabber, so how to make the lengthened arm of the wood grabber more durable is a problem that we often think about.
1. Lift and maintain the root of the tooth
The lifting of the root mounting plate is necessary, if the lifting here is not good, it will cause more damage, resulting in the teeth of the grab can not be installed.
For the reinforcement of the root mounting plate, two plans can be adopted, one is to stick reinforcement bars, and the other is to pack wear-resistant blocks. It should be noted that the practice of sticking reinforcement is simple and economic development, but when welding, we should pay attention to not causing overlap welding with the root of the tooth, which will harm the compressive strength of the root of the tooth welding.
2. Side plate and side lift
The strong damage of the side plate will reduce the reasonable bucket volume of the grab and harm the main production force. In addition, the edge knife also has the actual effect of selecting raw materials and maintaining the edge plate, so the grab needs to install the edge knife. Because the side is not a high damage area, the side lifting need not be too firm to prevent endangering the overall net weight of the grab.
3. Upgrade the base version
The bottom version of the upgrade, the new mobile phone has to wait for the bottom version of the reinforcement of the paint to be ground and then carried out reinforcement, so the actual effect of electric welding is stronger. The reinforcing bars of the base plate should be selected as hard and wear-resistant long plates to do raw materials, and the overall appearance of the grab should be maintained to prevent harm to the selection Angle of view and harm the production capacity. The electric welding of the reinforcing bars should be welded along the position of the electric welding of the original machine reinforcement plate and be welded on two plates.
4. Lift inside the grab bucket
Inside the lift can be applied to hard surface spray welding, although the price is high and the time is long, but its wear resistance and pertinence are strong, or you can also choose to stick a part of the reinforcement, but it is not suitable for too much.
In order to consider engineering projects, many wood grabbers are now carrying out extended arm modification, but the reinforcement of the grab can not be ignored, the grab is a key component of the grab machine, is the key element of the immediate decision on the quality of the bill of quantities, only the grab can not come out of the problem, can ensure the bill of quantities, improve work efficiency.
